Honda

Home » Honda
  • 2019 Honda Accord

    Honda Accord
    Mileage
    62,279
    Service Date
    8/21/2026
    Services Performed
    • Change Synthetic Motor Oil & Replace Oil Filter. Inspect all fluids condition and levels. Lube Chassis where applicable. Inspect & Rotate Tires Tires pressures have been set to specifications: F psi R psi Perform 46 point Preventive Maintenance Inspection
     
    Barbie S. gave our service a 5 star review on 8/21/2026
  • 2012 Honda Civic

    Honda Civic
    Mileage
    226,205
    Service Date
    7/30/2026
    Services Performed
    • Released tension on the belt tensioner and sound stopped. Removed and inspected belt for any wear from possible misaligned pulleys and was fine. Checked play on pump. Tensioner pulley and tensioner had excessive play. After installation of new tensioner, found that vehicle still was making very small knocking noise coming a/c compressor. Customer stated that other shops have recommended a/c compressor based off of it failing and a/c not working. Advised customer we would recommend replacing a/c compressor due to the knocking noise, but would still need to diagnose the vehicle for not blowing cold.
    • Perform 45 point inspection and report findings.
    • Preventive Maintenance Inspection – complimentary discount
    • Remove and Replace Serpentine Drive Belt Tensioner
     
    Pat B. gave our service a 5 star review on 7/31/2026
  • 2007 Honda CR-V

    Honda CR-V
    Mileage
    163,128
    Service Date
    7/23/2026
    Services Performed
    • Operating pressures at start of process: High Side: ____psi Low Side: ____psi Temperature reading at main dash vent (PRE-SERVICE): ______F Examine the following and report findings: – All exposed hoses, tubing, and connections for damage or leaks _______ – Compressor and clutch (when accessible) for damage, missing bolts, hardware, broken housing and leaks ______ _ Compressor – rotate manually to determine if seized or locked up ____ – Service ports for missing caps, damaged threads and conformance with labeling _____ – Condensor coil for damage, restrictions or leaks _____ – Expansion device (if accessible) for physical damage or leaks _____ – Accumulator receiver dryer and in-line filter for damage, missing or loose hardware or leaks ____ – Drive belt system for damage, missing pulleys or tensioners and proper belt routing, tension alignment, excessive wear or cracking ____ – Fan clutch (if applicable) for leakage, bearing wear and proper operation ____ – Cooling fan for bent or missing blades _____ – Electric cooling fan for proper operation ______ – All accessible electrical connections for loose, burnt broken or corroded parts _____ Identify the refrigerant in use ______________ (type) and is free of contaminants _______ Amount of refrigerant recovered_____ Amount recharged_____ Verify the system has been checked for leakage at a minimum pressure of 50psi or vacuum of 30in for 30 minutes _____ Verify proper operation of the compressor clutch, blower motor, and air control doors _____ After service pressures: High side ______psi Low side _____psi After service temperature at the Center air distribution outlet _____F .
    • A/C COMPRESSOR – Remove & Replace – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
    • Operating pressures at start of process: High Side: ____psi Low Side: ____psi Temperature reading at main dash vent (PRE-SERVICE): ______F Examine the following and report findings: – All exposed hoses, tubing, and connections for damage or leaks _______ – Compressor and clutch (when accessible) for damage, missing bolts, hardware, broken housing and leaks ______ _ Compressor – rotate manually to determine if seized or locked up ____ – Service ports for missing caps, damaged threads and conformance with labeling _____ – Condensor coil for damage, restrictions or leaks _____ – Expansion device (if accessible) for physical damage or leaks _____ – Accumulator receiver dryer and in-line filter for damage, missing or loose hardware or leaks ____ – Drive belt system for damage, missing pulleys or tensioners and proper belt routing, tension alignment, excessive wear or cracking ____ – Fan clutch (if applicable) for leakage, bearing wear and proper operation ____ – Cooling fan for bent or missing blades _____ – Electric cooling fan for proper operation ______ – All accessible electrical connections for loose, burnt broken or corroded parts _____ Identify the refrigerant in use ______________ (type) and is free of contaminants _______ Amount of refrigerant recovered_____ Amount recharged_____ Verify the system has been checked for leakage at a minimum pressure of 50psi or vacuum of 30in for 30 minutes _____ Verify proper operation of the compressor clutch, blower motor, and air control doors _____ After service pressures: High side ______psi Low side _____psi After service temperature at the Center air distribution outlet _____F .
    • EVAPORATOR EXPANSION VALVE – Remove & Replace – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
    • ALTERNATOR ASSEMBLY – Remove & Replace – [Includes: Test.]
     
    Michael P. gave our service a 5 star review on 7/24/2026
  • 2017 Honda Accord

    Honda Accord
    Mileage
    137,709
    Service Date
    7/22/2026
    Services Performed
    • Alignment of 4 Wheels. Set caster, camber, toe-in and thrust angles (where possible). Center steering wheel. Road test vehicle.
     
    Ethan R. gave our service a 5 star review on 7/22/2026
  • 2011 Honda Accord

    Honda Accord
    Mileage
    188,214
    Service Date
    7/8/2026
    Services Performed
    • SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include disassemble or alignment.]
    • STRUT ASSEMBLY – Removal & Installation – Both – [DOES NOT include disassemble or alignment.]
    • Remove and Replace 4 Tires.
    • Alignment of 4 Wheels. Set caster, camber, toe-in and thrust angles (where possible). Center steering wheel. Road test vehicle.
     
    Jaime Z. gave our service a 5 star review on 7/8/2026
  • 2015 Honda Pilot

    Honda Pilot
    Mileage
    146,105
    Service Date
    6/8/2026
    Services Performed
    • Change Synthetic Motor Oil & Replace Oil Filter. Inspect all fluids condition and levels. Lube Chassis where applicable. Inspect & Rotate Tires Tires pressures have been set to specifications: F psi R psi Perform 46 point Preventive Maintenance Inspection
     
    Mike R. gave our service a 5 star review on 6/8/2026
  • 2015 Honda CR-V

    Honda CR-V
    Mileage
    165,126
    Service Date
    6/2/2026
    Services Performed
    • Technician states that the undercarriage of vehicle is super clean with no oil leaks. The only oil leak that looks to be coming from the vehicle is from the oil filter. With the new oil filter now there seems to be no leaks. Vehicle may possibly have a engine oil filter housing leak, but with the new filter on, vehicle looks good.
    • Change Synthetic Motor Oil & Replace Oil Filter. Inspect all fluids condition and levels. Lube Chassis where applicable. Inspect & Rotate Tires Tires pressures have been set to specifications: F psi R psi Perform 46 point Preventive Maintenance Inspection
    • WHEEL STUD – Remove & Replace – Front, One, One Side – [Includes: R&I Hub & Bearing Assembly.]
     
    Margaret M. gave our service a 5 star review on 6/2/2026
  • 2019 Honda CR-V

    Honda CR-V
    Mileage
    35,558
    Service Date
    5/29/2026
    Services Performed
    • Change Synthetic Motor Oil & Replace Oil Filter. Inspect all fluids condition and levels. Lube Chassis where applicable. Inspect & Rotate Tires Tires pressures have been set to specifications: F psi R psi Perform 46 point Preventive Maintenance Inspection
     
    Socorro S. gave our service a 5 star review on 5/29/2026
  • 2016 Honda Accord

    Honda Accord
    Mileage
    71,674
    Service Date
    4/17/2026
    Services Performed
    • Change Synthetic Motor Oil & Replace Oil Filter. Inspect all fluids condition and levels. Lube Chassis where applicable. Inspect & Rotate Tires Tires pressures have been set to specifications: F psi R psi Perform 46 point Preventive Maintenance Inspection
     
    Kristiana Q. gave our service a 5 star review on 4/17/2026
  • 2022 Honda Accord

    Honda Accord
    Mileage
    42,545
    Service Date
    4/14/2026
    Services Performed
    • Mount and Balance 4 tires.
    • Change Synthetic Motor Oil & Replace Oil Filter. Inspect all fluids condition and levels. Lube Chassis where applicable. Inspect & Rotate Tires Tires pressures have been set to specifications: F psi R psi Perform 46 point Preventive Maintenance Inspection
     
    JOHNATHAN R. gave our service a 5 star review on 4/14/2026